The World of Free Energy
In the late 1880's, trade journals in the electrical sciences were predicting "free electricity" in the near future. Incredible discoveries about the nature of electricity were becoming common place. Nikola Tesla was demonstrating "wireless lighting" and other wonders associated with high frequency currents. There was an excitement about the future like never before.
Within 20 years, there would be automobiles, airplanes, movies, recorded music, telephones, radio, and practical cameras. The Victorian Age was giving way to something totally new. For the first time in history, common people were encouraged to envision a utopian future, filled with abundant modern transportation and communication, as well as jobs, housing and food for everyone. Disease would be conquered, and so would poverty. Life was getting better, and this time, everyone was going to get "a piece of the pie." So, what happened? In the midst of this technological explosion, where did the energy breakthroughs go? Was all of this excitement about "free electricity", which happened just before the beginning of the last century, all just wishful thinking that "real science" eventually disproved?
Current State of Technology
Actually, the answer to that question is NO. In fact, the opposite is true. Spectacular energy technologies were developed right along with the other breakthroughs. Since that time, multiple methods for producing vast amounts of energy at extremely low cost have been developed. None of these technologies have made it to the "open" consumer market as an article of commerce, however. Exactly why this is true will be discussed shortly. But first, I would like to describe to you a short list of "free energy" technologies that I am currently aware of, and that are proven beyond all reasonable doubt. The common feature connecting all of these discoveries, is that they use a small amount of one form of energy to control or release a large amount of a different kind of energy. Many of them tap the underlying aether in some way; a source of energy conveniently ignored by "modern" science.
1) Radiant Energy.
Nikola Tesla's Magnifying Transmitter, T. Henry Moray's Radiant Energy Device, Edwin Gray's EMA Motor, and Paul Baumann's Testatika Machine all run on Radiant Energy. This natural energy form can be gathered directly from the environment (mistakenly called "static" electricity) or extracted from ordinary electricity by the method called "fractionation." Radiant Energy can perform the same wonders as ordinary electricity, at less than 1% of the cost. It does not behave exactly like electricity, however, which has contributed to the scientific community's misunderstanding of it. The Methernitha Community in Switzerland currently has 5 or 6 working models of fuelless, self-running devices that tap this energy.
2) Permanent Magnets.
Dr. Robert Adams (NZ) has developed astounding designs of electric motors, generators and heaters that run on permanent magnets. One such device draws 100 watts of electricity from the source, generates 100 watts to recharge the source, and produces over 140 BTU's of heat in two minutes! Dr. Tom Bearden (USA) has two working models of a permanent magnet powered electrical transformer. It uses a 6-watt electrical input to control the path of a magnetic field coming out of a permanent magnet. By channeling the magnetic field, first to one output coil and then a second output coil, and by doing this repeatedly and rapidly in a "Ping-Pong" fashion, the device can produce a 96-watt electrical output with no moving parts. Bearden calls his device a Motionless Electromagnetic Generator, or MEG. Jean-Louis Naudin has duplicated Bearden's device in France. The principles for this type of device were first disclosed by Frank Richardson (USA) in 1978. Troy Reed (USA) has working models of a special magnetized fan that heats up as it spins. It takes exactly the same amount of energy to spin the fan whether it is generating heat or not. Beyond these developments, multiple inventors have identified working mechanisms that produce motor torque from permanent magnets alone.
3) Mechanical Heaters.
There are two classes of machines that transform a small amount of mechanical energy into a large amount of heat. The best of these purely mechanical designs are the rotating cylinder systems designed by Frenette (USA) and Perkins (USA). In these machines, one cylinder is rotated within another cylinder with about an eighth of an inch of clearance between them. The space between the cylinders is filled with a liquid such as water or oil, and it is this "working fluid" that heats up as the inner cylinder spins. Another method uses magnets mounted on a wheel to produce large eddy currents in a plate of aluminium, causing the aluminium to heat up rapidly. These magnetic heaters have been demonstrated by Muller (Canada), Adams (NZ) and Reed (USA). All of these systems can produce ten times more heat than standard methods using the same energy input.
4) Super-Efficient Electrolysis.
Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.
All major industrial engines use the release of heat to cause expansion and pressure to produce work, like in your car engine. Nature uses the opposite process of cooling to cause suction and vacuum to produce work, like in a tornado. Viktor Schauberger (Austria) was the first to build working models of Implosion Engines in the 1930's and 1940's. Since that time, Callum Coats has published extensively on Schauberger's work in his book Living Energies and subsequently, a number of researchers have built working models of Implosion Turbine Engines. These are fuelless engines that produce mechanical work from energy accessed from a vacuum. There are also much simpler designs that use vortex motions to tap a combination of gravity and centrifugal force to produce a continuous motion in fluids.
6) Cold Fusion.
In March 1989, two Chemists from Brigham Young University in Utah (USA) announced that they had produced atomic fusion reactions in a simple tabletop device. The claims were "debunked" within 6 months and the public lost interest. Nevertheless, Cold Fusion is very real. Not only has excess heat production been repeatedly documented, but also low energy atomic element transmutation has been catalogued, involving dozens of different reactions! This technology definitely can produce low cost energy and scores of other important industrial processes.
7) Solar Assisted Heat Pumps.
The refrigerator in your kitchen is the only "free energy machine" you currently own. It's an electrically operated heat pump. It uses one amount of energy (electricity) to move three amounts of energy (heat). This gives it a "co-efficient of performance" (COP) of about 3. Your refrigerator uses one amount of electricity to pump three amounts of heat from the inside of the refrigerator to the outside of the refrigerator. This is its typical use, but it is the worst possible way to use the technology. Here's why. A heat pump pumps heat from the "source" of heat to the "sink" or place that absorbs the heat. The "source" of heat should obviously be HOT and the "sink" for heat should obviously be COLD for this process to work the best. In your refrigerator, it's exactly the opposite. The "source" of heat is inside the box, which is COLD, and the "sink" for heat is the room temperature air of your kitchen, which is warmer than the source. This is why the COP remains low for your kitchen refrigerator. But this is not true for all heat pumps. COP's of 8 to 10 are easily attained with solar assisted heat pumps. In such a device, a heat pump draws heat from a solar collector and dumps the heat into a large underground absorber, which remains at 55° F, and mechanical energy is extracted in the transfer. This process is equivalent to a steam engine that extracts mechanical energy between the boiler and the condenser, except that it uses a fluid that "boils" at a much lower temperature than water. One such system that was tested in the 1970's produced 350 hp, measured on a Dynamometer, in a specially designed engine from just 100-sq. ft. of solar collector. (This is NOT the system promoted by Dennis Lee.) The amount of energy it took to run the compressor (input) was less than 20 hp, so this system produced more than 17 times more energy than it took to keep it going! It could power a small neighborhood from the roof of a hot tub gazebo, using exactly the same technology that keeps the food cold in your kitchen. Currently, there is an industrial scale heat pump system just north of Kona, Hawaii that generates electricity from temperature differences in ocean water.
There are dozens of other systems that I have not mentioned, many of them are as viable and well tested as the ones I have just recounted. But this short list is sufficient to make my point: free energy technology is here, now. It offers the world pollution-free, energy abundance for everyone, everywhere. It is now possible to stop the production of "greenhouse gases" and shut down all of the nuclear power plants. We can now desalinate unlimited amounts of seawater at an affordable price, and bring adequate fresh water to even the most remote habitats. Transportation costs and the production costs for just about everything can drop dramatically. Food can even be grown in heated greenhouses in the winter, anywhere. All of these wonderful benefits that can make life on this planet so much easier and better for everyone have been postponed for decades. Why? Whose purposes are served by this postponement?
What is starting to happen is that inventors are publishing their work, instead of patenting it and keeping it secret. More and more, people are "giving away" information on these technologies in books, videos and websites. While there is still a great deal of useless information about free energy on the Internet, the availability of good information is rising rapidly. Check out the list of websites and other resources at the end of this article.
It is imperative that you begin to gather all of the information you can on real free energy systems. The reason for this is simple. Focus on what you can do now, not on how much there still is to be done. Small, private research groups are working out the details as you read this. Many are committed to publishing their results on the Internet.
If we stand up and refuse to remain ignorant and action-less, we can change the course of history. It is the aggregate of our combined action that can make a difference. Only the mass action that represents our consensus can create the world we want. Nevertheless, free energy technology is here. It is real, and it will change everything about the way we live, work and relate to each other. In the last analysis, free energy technology obsoletes greed and the fear for survival. But like all exercises of Spiritual Faith, we must first manifest the generosity and trust in our own lives
The Source of Free Energy is INSIDE of us. It is that excitement of expressing ourselves freely. It is our Spiritually guided intuition expressing itself without distraction, intimidation or manipulation. It is our open-heartedness. Ideally, the free energy technologies underpin a just society where everyone has enough food, clothing, shelter, self-worth, and the leisure time to contemplate the higher Spiritual meanings of Life. Do we not owe it to each other, to face our fears, and take action to create this future for our children's children?
The following is an excerpt. The full version is available at: http://www.escribe.com/science/keelynet/m10192.html
Living Energies by Callum Coats
The Free Energy Secrets of Cold Electricity by Peter Lindemann, D.Sc.
Applied Modern 20th Century Aether Science by Dr. Robert Adams
Physics Without Einstein by Dr. Harold Aspden
Secrets of Cold War Technology by Gerry Vassilatos
The Coming Energy Revolution by Jeanne Manning
http://www2.murray.net.au/users/egel/content1.htm developed by Geoff Egel in Australia. Best free-energy site on the net!
http://www.free-energy.cc developed by Clear Tech, Inc. and Dr. Peter Lindemann
http://jnaudin.free.fr developed by JLN Labs in France
http://www.1dove.com/fe/index.html Jim's Free Energy Page in the USA
http://www.keelynet.com developed by Jerry Decker in the USA
http://www.xogen.com site for super electrolysis technology
http://www.rumormillnews.com excellent site for all kinds of alternative news, with many links
Patents: most can be viewed at http://www.delphion.com
This list is nothing more than a sample of inventions that produce free energy.